一种图像校正的偏振光罗盘系统的研究

导航传感器在探险、应急、精确制导武器、船舶、航空器导航和定位系统中起着关键作用。针对偏振光罗盘在倾斜状态下误差较大的问题,提出了一种利用加速度计和陀螺仪对偏振光罗盘进行图像校正的方法,设计了一种基于陀螺仪校正的偏振光罗盘系统。首先利用加速度计和陀螺仪计算得到载体姿态角,对偏振光图像数据进行图像校正,采用Stokes矢量法解算大气偏振模式分布,进而提取导航特征点,最后对特征点进行拟合解算出航向角信息。并且进行了静态和动态测试实验,实验结果表明,该算法能够有效的对偏振光罗盘姿态变化引起的误差进行补偿,可以将偏振光罗盘的航向角测量误差控制在1.86°之内,平均误差为0.09°。     

图像分类中基于分类矢量量化的视觉词袋模型

特征表示是图像识别和分类的基础，视觉词袋是一种图像的特征表示方法。分析现有视觉词典构建方法的不足，提出一种新的视觉词典构建方法。首先利用梯度方差把特征矢量分为光滑类和边缘类，然后分别针对不同类别的特征矢量进行视觉词典的构建，最后根据两类视觉词典生成视觉词袋。图像分类实验表明，提出的新方法能提高分类准确率。     

Experimental investigation of far-field human cough airflows from healthy and influenza-infected subjects

Seasonal influenza epidemics have been responsible for causing increased economic expenditures and many deaths worldwide. Evidence exists to support the claim that the virus can be spread through the air, but the relative significance of airborne transmission has not been well defined. Particle image velocimetry (PIV) and hot-wire anemometry (HWA) measurements were conducted at 1 m away from the mouth of human subjects to develop a model for cough flow behavior at greater distances from the mouth than were studied previously. Biological aerosol sampling was conducted to assess the risk of exposure to airborne viruses. Throughout the investigation, 77 experiments were conducted from 58 different subjects. From these subjects, 21 presented with influenza-like illness. Of these, 12 subjects had laboratory-confirmed respiratory infections. A model was developed for the cough centerline velocity magnitude time history. The experimental results were also used to validate computational fluid dynamics (CFD) models. The peak velocity observed at the cough jet center, averaged across all trials, was 1.2 m/s, and an average jet spread angle of θ = 24° was measured, similar to that of a steady free jet. No differences were observed in the velocity or turbulence characteristics between coughs from sick, convalescent, or healthy participants.     

铜基化合物的可见光催化研究进展

与传统贵金属光催化剂相比，铜基光催化剂具有价格低廉、绿色环保、反应条件温和、光催化活性可调节等优势，受到合成化学家们广泛关注。本文简述了铜基催化剂的光催化历史，回顾了近五年来铜基化合物在可见光催化领域的研究成果与进展，总结了铜基催化剂的独立光催化机理与协同光催化机理；简要阐述了铜催化剂在不同类型反应中的应用，重点讨论了铜(Ⅰ)催化剂在烯烃官能化、碳-碳偶联、碳-杂偶联、原位催化等反应中的应用研究，表明铜基化合物在光催化合成领域具有很大的应用潜力。对未来的研究工作进行了展望，指出拓展催化剂的反应适用性、探索催化剂的氧化还原能力、进一步开发催化剂在手性合成中的应用将是该领域的研究重点。     

SNCR脱硝技术在液态排渣煤粉工业锅炉中的应用

为了检验选择性非催化还原（SNCR）脱硝技术在高效低NO_x液态排渣煤粉工业锅炉中的应用效果，本文在一台8.4MW有机热载体锅炉炉膛内开展了SNCR脱硝技术工业化试验研究。选用尿素作为还原剂，搭建了工业化SNCR脱硝试验平台。在10%、15%、20%三种浓度尿素溶液下进行了不同尿素溶液喷射量、不同氧含量、不同锅炉负荷下的SNCR脱硝试验研究。试验结果表明，提出的“低NO_x燃烧+SNCR脱硝”耦合技术方案是可行的，SNCR脱硝效率在80%以上，完全能够达到烟气中NO_x低于50mg/m³的超低排放要求。     

Sparse non-convex Lp regularization for cone-beam X-ray luminescence computed tomography

Cone-beam X-ray luminescence computed tomography (CB-XLCT) is an attractive hybrid imaging modality, and it has the potential of monitoring the metabolic processes of nanophosphors-based drugs in vivo. However, the XLCT imaging suffers from a severe ill-posed problem. In this work, a sparse nonconvex L_p (0?p?L₁ regularization. Further, an iteratively reweighted split augmented lagrangian shrinkage algorithm (IRW_SALSA-L_p) was proposed to efficiently solve the non-convex L_p (0?p?p-values (1/16, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8) in both 3D digital mouse experiments and in vivo experiments. The results demonstrate that the proposed non-convex methods outperform L₂ and L₁ regularization in accurately recovering sparse targets in CB-XLCT. And among all the non-convex p-values, our L_p(1/4?p?相似文献   

Investigation of the energy-size reduction and mineral liberation of raw coal in the Hardgrove mill

Raw coal was ground in a Hardgrove mill, and mineral liberation from coal was investigated by float-sink test and electron probe microanalyzer (EPMA). Based on EPMA, associated conditions of mineral were determined. Analyses of energy-size reduction show that energy efficiency decreases with time. For +0.074 mm progenies, yields of particles in ?1.5 g.cm^?3 decrease with the increase of size and time, and products in +1.8 g.cm^?3 show the opposite trend. EPMA of 0.25–0.125 mm, 1.5–1.8 g.cm^?3 products ground for 10 min indicates that only part of minerals are liberated. For ?0.074 mm products, the yield of particles in ?1.5 g.cm^?3 decreases by 23.36% in last several minutes, but ash content of +1.8 g.cm^?3 also decreases by 13.18%. Since breakage of raw coal in last 9 min does not reduce particle size obviously, and liberation degree cannot be improved dramatically, closed grinding of 10 min in Hardgrove mill is proper to balance the size reduction and mineral liberation.     

不同降雨入渗条件下预应力锚索加固边坡稳定性分析

为了研究不同降雨条件下边坡安全系数及预应力锚索轴力变化规律,以省道S303沿线某边坡为研究对象,考虑土体饱和-非饱和渗流与非饱和强度理论,基于有限元分析,对不同降雨工况下的孔隙水压分布、锚索轴力及采用强度折减法计算的边坡安全系数变化规律进行了研究。结果表明: 降雨量一定时,降雨入渗范围随雨强增大而减小,暂态饱和区域随雨强增加而增大; 边坡在加固前后的安全系数均随降雨量增加而不断减小,采用预应力锚索加固能有效提高边坡安全系数,并减小降雨对边坡稳定性的影响; 随着降雨量增加,各锚索轴力均增大,当降雨量一定时,雨强越小,对应的锚索轴力提升幅度越大,靠近底部的锚索轴力对降雨最为敏感。     

Physicochemical and technological properties of beef burger as influenced by the addition of pea fibre

This study aimed to evaluate the physicochemical characteristics and sensory attributes of beef burgers with the addition of pea fibre as a partial substitute of meat or fat. Three formulations were prepared: control (CON) – similar to the commercial formulation; fibre/less meat (FLM)—5% meat reduction and addition of 1% pea fibre; fibre/less fat (FLF)—7% fat reduction and addition of 1% pea fibre. Non-significant differences were obtained for pH, colour parameters (L* and b*), texture profile, cooking loss and size reduction among formulations. Moreover, sensory analysis with consumers of beef burgers did not indicate differences among the formulations for all the analysed attributes. Therefore, pea fibre is a promising partial replacer for meat and fat in beef burgers due to the preservation of technological parameters and sensory acceptance.